PRO STOCK ENGINE BLOCK - SEQUENTIAL HEAD
This part is no longer available.
M-6010-JC51
Instruction Sheet
Not Available
- Designed for 500 CID NHRA Pro Stock engine application
- Unique lifter bore locations to accommodate Sequential cylinder head M-6049-JC51
- Cast of CGI iron with 4.900" bore spacing
- Siamese bores, left bank leading, maximum bore size 4.750"
- Dry sump design with provisions to scavenge cam tunel
- 6.800" cam to crank center distance and a cast cam tunnel
- Nine camshaft bearing bores accept 70 mm roller bearings
- Lifter bores machined at 1.221"
- Lifter bore angles, 48.0 degrees intake, 56.0 degrees exhaust
- Four bolt 4130 billet main caps 1-5
- Deck delivered at 9.125"
- Estimated weight with caps 207 lbs.
- Requires:
- Retainer - Front Crankshaft Seal M-6059-JC50
- Retainer - Main Seal Kit M-6318-JC50
- Retainer - Rear Crankshaft Seal M-6701-JC50
- Pro Stock Adaptor - Oil Inlet To Block M-6881-JC50
- Pro Stock Plug-Cam Kit M-6026-JC51
- Racer to Order KBD-34700 Pro Stock Timing Set - Cam Drive direct from Jesel Valvetrain Innovations, Phone: 732-901-1800
- Racer to Order T13668 Seal-Crankshaft-Front and T13562 Seal-Crankshaft-Rear direct from Tri-Tec Seal, Inc., Phone: 810-655-3900
Part Type
Engine: Engine Blocks
Warranty Availability
Not Available
Package Dimensions
31.5" x 22" x 25.5"
Package Weight
269 lb(s)
UPC Code
756122114476
Country of Origin
Great Britain
