8.8" 3.27 RING GEAR AND PINION
Ford Performance 8.8" Gear Sets
No one does 8.8" gears better than Ford Performance - stronger and quieter.
The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Perforamnce is the manufacturer of choice when it's time to hop-up your axle.
- Made in the United States at Ford's Sterling Axle Plant (competitors in our price range are primarily produced in China)
- OEM quality - our superior surface finish, hardening, and manufacturing consistency provide the strongest and quietest 8.8" gears in the market! Higher quality gears means more satisfied customers!
- Race Proven - Ford Performance 8.8" gears are the choice of championship road racing and drag racing teams including Multimatic Motorsports.
When your plans call for an 8.8" gear look for the only brand good enough to wear the Ford oval.
M-4209-88308 | 8.8" 3.08 RING & PINION |
M-4209-88315 | 8.8" 3.15 RING & PINION |
M-4209-88327 | 8.8" 3.27 RING & PINION |
M-4209-88331 | 8.8" 3.31 RING & PINION |
M-4209-88355 | 8.8" 3.55 RING & PINION |
M-4209-88373 | 8.8" 3.73 RING & PINION |
M-4209-88410 | 8.8" 4.10 RING & PINION |
M-4209-88456 | 8.8" 4.56 RING & PINION |
For Ford Performance Ring Gear and Pinion installation instructions CLICK HERE
When you're purchasing a new 8.8" gear set make sure your bearings and shims are up to the task with Ford Performance High Performance Installation Kits!
8.8" Installation Kits
Ford Performance recommends our installation kits for all 8.8" ring & pinion gear sets.
These install kits use the highest quality components and are often upgrades to what the vehicle came with
Perfect for gear installation in new vehicles with new bearings | Excellent upgrade for all 8.8" rear ends - high torque bearing gives added durability for modified vehicles | Ideal for completely freshening an 8.8" solid axle |
Fits all 8.8-inch axles 1986-present including IRS | Fits all 8.8-inch axles 1986-present including IRS | Fits all 8.8-inch axles 1986-2004 except IRS |
Kit includes: pinion and carrier shims, crush sleeve, pinion seal, pinion nut, and ring gear bolts. | Contains all components from M-4210-A plus all differential bearings | Contains all components from M-4210-B2 plus 8.8" AXLE BEARING AND SEAL KIT M-1225-B |
| Kit includes: pinion and carrier shims, crush sleeve, pinion seal, pinion nut, ring gear bolts, high-torque pinion bearing, OE carrier bearings, gear marking compound, and cover gasket. | Kit includes: pinion and carrier shims, crush sleeve, pinion seal, pinion nut, ring gear bolts, high-torque pinion bearing, OE carrier bearings, gear marking compound, cover gasket, outer axle seals and bearings. |
NMRA/NMCA racer and performance shop co-owner Bob Kurgan wins races with his Ford Performance 8.8" gears.
"We run Ford Performance gears in our 7-second race cars and recommend them exclusively to our street customers. They are the strongest and quietest gears available!"